|
|
| |
ATS-8015 ATS-8015/SUB ATS-6012 ATS-6012/SUB ATS-8006 ATS-8006/SUB |
|
| |
| |
 |
|
| |
|
|
| |
ATS-8015
Key Features
The ATS8015 is a line array system which combines innovative horn loading techniques with
line array technology to produce a very powerful line array with maximum dynamic impact. It is
a 3-way, full-range system and may be used without subwoofers for many applications.
Where very low frequency extension is required, a ATS8015 array will integrate seamlessly with
the D.E ATS8015B folded-horn subwoofer in a fully horn-loaded 4-way configuration.
The low frequency section of the ATS8015 comprises a horn loaded 15" (380mm) / 4" (100mm)
voice coil driver that is reflex loaded to extend the LF output to below the natural cut-off point of
the horn. This bass horn technique marries the very high efficiency of horn loading with the
extended low frequency response of a reflex enclosure.
The mid-horn of the ATS8015 utilizes 2 x 8" (200mm) / 2" (50mm) coil drivers to produce 108dB
at 1metre for a 1W input.
The twin 8" (200mm) mid-horn geometry and short, toroidal donut phase plug work together to maintain a low curvature wave front and wide 90° horizontal coverage pattern of the mid
frequencies right up to the 2.5kHz crossover point.
The ATS8015 HF section comprise three 1" (25mm) exit compression drivers that couple very
smooth horizontal HF pattern control with the high efficiency (112dB/W) required for very long
throw applications.
The proprietary rigging system of the ATS8015 is quick to deploy and allows a wide range of
array curvatures to be achieved as called up by the ViewPoint array optimization software.
ATS8015 columns are hinged at the front for gap free HF coverage. Inter-cabinet angles from 0°
to 8° are set by a rotating splay bar at the rear of the enclosure. The 80 maximum splay angle
allows tight curvature at the bottom of the array, obviating the need for dedicated downfalls. All
cabinet rigging hardware is integral and remains captive in transit.
ATS8015 systems are designed to be powered by PA900 power amplifiers.
High SPL & high performance 15″ three-way line array loudspeaker system.
High SPL - maximum SPL 136dB continuous, 142dB peak
Prevent water and dust connector: 2 x PLT 8pin connectors.
Wide range dispersion - 90° horizontal New HF Neodymium magnet titanium diaphragm
compression driver.
Full range - 55Hz-19KHz (-3dB) High sensitivity - LF: 105dB/1W/1m MF: 108dB/1W/1m , , HF: 112dB/1W/1m
Fast integral rigging system with variable splay angles from 0° to 8°
Applications
Live sound -open air venues, arenas, concert halls
Fixed installation-multi purpose auditoria, sports arenas
|
|
| |
Technical Specifications |
|
| |
Type.......................................3-way,
full range line array loudspeaker system
Drivers...................................LF:1×15",4" Voice Coil,bass horn loaded
MF:2×8",2" voice coil,horn loaded
HF:3×1"exit,2"Neodymium magnet titanium diaphragm,
compression driver,on low distortion horn.
Frequency Response.........50Hz-20KHz(-10dB) 55Hz-19KHz(-3dB)
Rated Power.........................LF:500W , MF:400W , HF:180W
Sensitivity...............................LF:105dB/1W/1M MF:108dB/1W/1M HF:112dB/1W/1M
Max SPL.................................LF+MF:134dB continuous,140dB peak
HF:136dB continuous,142dB peak
Nominal Impedance............LF+MF: 8 Ohms HF:16 Ohms
Dispersion(-6dB)..................90° horizontal,10° vertical
Fittings....................................Proprietary rigging system
Dimensions(W×H×D)......1312×490(290)×755mm
Net Weight.............................97kg |
|
|
| |
|
|
|
|
| |
|
|
 |
|
 |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
Enlarge for View |
|
Enlarge for View |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
 |
|
|
|
 |
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
| |
|
|
